dmacnz Posted June 6, 2017 Report Share Posted June 6, 2017 Hi,I have installed a subaru OEM based E-throttle on my project car. I have a AUX controller the feed relay for the AUX9/10.On a G4+ Extreme Is it normal to have a Au9/10 power feed error when the e-throttle relay is no latched?! I would of thought the software would know it turned the relay off and not trigger a error?! Not sure if i have buggered up the wiring or its normal.Throttle works perfect in "setup" mode. Engine hasnt been fired up yet. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 6, 2017 Report Share Posted June 6, 2017 I think this is probably normal behavior but I cant test it myself easily right now as my simulator keeps aux 9 & 10 supply live all the time. I wouldnt worry about it too much for now as under normal running conditions that relay should be on all the time. Report back if it doesnt work as expected when its running and we will take a closer look. Quote Link to comment Share on other sites More sharing options...
dmacnz Posted June 13, 2017 Author Report Share Posted June 13, 2017 Still unable to make the e-throttle work in "on" mode. Its works perfect in setup mode with no error messages.As soon as I change the setting to "on" it kills power (e-throttle relay 1). And then the Aux9/10 feed error comes up.Any ideas?Using Aux 9.10 for e throttle outs. and a Fuel aux out for the E-trottle relay..Everything works perfect in Setup mode! Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 13, 2017 Report Share Posted June 13, 2017 The quickest way to find the cause will be to do a PC Log with all parameters recorded. Start logging with E-throttle in setup mode, move throttle a little, then set to "on" mode, move throttle a little again, hopefully error occurs then stop logging and attach that and your map here.How to do PC Log: https://www.youtube.com/watch?v=_P1LRANeO4A Quote Link to comment Share on other sites More sharing options...
dmacnz Posted June 18, 2017 Author Report Share Posted June 18, 2017 Ok, Will get a log on monday. It seems that when ever it is changed from "setup" to "on" it shuts down the e throttle relay for some reason Quote Link to comment Share on other sites More sharing options...
Simon Posted June 18, 2017 Report Share Posted June 18, 2017 HiWhat setting do you have for the when stalled option?If this is on Quiet Throttle it will turn the relay off when the engine is not running. Quote Link to comment Share on other sites More sharing options...
dmacnz Posted June 22, 2017 Author Report Share Posted June 22, 2017 Attached is the log. Started on test mode, and then switching to on... e throttle stops working.. back to setup and all works again. ethrot test.llg E throttle relay is Ign driver 8 WAGON SORTED FUEL.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 22, 2017 Report Share Posted June 22, 2017 Your E-throttle system is shutting down into safety mode due to an AP tracking error. I think your problem is due to the incorrect "APS (Sub) 100%" setting, yours is set to zero but it would normally be 100%. Try setting this to 100%, do a store and have another try. Quote Link to comment Share on other sites More sharing options...
Anthony Parle Posted August 2, 2020 Report Share Posted August 2, 2020 Thanks for this guys I had to same problem with it shutting the relay, change "When Stalled" setting and the problem is fixed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.