FlorianZankl Posted June 12, 2017 Report Share Posted June 12, 2017 HelloI´m running a Link G4 Storm (silver Case) wire in ECU in my Toyota Mr2 W2 with the 3SGTE Generation 3 engine.Engine running fine but it Revs only 6000rpm but the RPM Limit is set to 7400rpm.We have no idea why.Specs are:Coil on Plug from 1zzfeValvetrain stockcamshaft from N/A engineBorg Warner EFR 6758Forged EngineSard 800ccm InjectorsThe map is uploadedPlease Help Zankll Florian.pcl Quote Link to comment Share on other sites More sharing options...
Simon Posted June 13, 2017 Report Share Posted June 13, 2017 If you could take a PC log of all parameters through to the RPM limit we will then be able to see what is happening better Quote Link to comment Share on other sites More sharing options...
FlorianZankl Posted June 14, 2017 Author Report Share Posted June 14, 2017 FlorianZankl 1.llg Quote Link to comment Share on other sites More sharing options...
Simon Posted June 14, 2017 Report Share Posted June 14, 2017 On an initial look through the log the ECU is not applying any limits.I do notice your dwell is on the high side for the coils you are running. I would reduce this down to 2.5ms and see if you have any difference. Quote Link to comment Share on other sites More sharing options...
FlorianZankl Posted June 19, 2017 Author Report Share Posted June 19, 2017 HelloI reduced the Dwell to 2.5ms but without a change.Its strange but on the map the Rpm Limit is Orange but when i set it below 6000 rpm ist blackit seems there is a Limit Quote Link to comment Share on other sites More sharing options...
Simon Posted June 20, 2017 Report Share Posted June 20, 2017 (edited) That is just to do with the color set up of the parameters it is not a sign the limit is actually active.If you go to the runtimes window (r or F12) then go to the Triggers/Limits tab it will show there if a limit is active. Edited June 20, 2017 by Simon Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted June 20, 2017 Report Share Posted June 20, 2017 Florian,What is the plug gap on the spark plugs? Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted June 20, 2017 Report Share Posted June 20, 2017 Could it be a mechanical issue like valve float? Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted June 21, 2017 Report Share Posted June 21, 2017 I would not so much expect valve float, although it is possible. Stock 3sgte rev limit on stock computer is 7000rpm. Wouldn't surprise me one bit if it was ignition break up. Quote Link to comment Share on other sites More sharing options...
bsh Posted July 18, 2017 Report Share Posted July 18, 2017 Do you get any trigger errors while this happening? Press "R" and look under "triggers" and see if the trigger error counter are counting while revving to 6000 rpm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.