Base Map 350Z VQ35

[dynonrw]

Hello guys ,

i will be running a 350Z VQ35 engine on a G4  ecu ,i am interested in help,  or if some one can provide me a base map for this engine .

Thank you in advance ... dynonrw

[dynonrw]

Hello guys ,

i will be starting- running a new projekt nissan 350z vq35 singel vanos .

I am interested in help - wirring diagram or some base map to start this engine faster .

Thank xou in advance .... dynonrw

[dynonrw]

Hello guys,

i will be starting to run and set up a vipec i/v88 ecu on my 350Z VQ35 singel vans.

If some one can help it will be fine .

Pin out drawing or basemap will helpfull.

Thank you in advance ... dynonrw

 

[Brad Burnett]

There is a base calibration file that populates when you download the software.

There is a base cal for the 350z in the there.

[Adamw]

Hi Dynonrw, since you had started 3 separate threads in two different forums all asking the same thing I have merged them all into this one post.

As Brad says there is a 350Z base map supplied when you install our software.  Most of the pinout info is in the PCLink helpfile, you will also need to look at the "pin functions" list, I have added a screenshot below so you know where to find those.  Note we also have a plugin ECU for this car which might be easier than using a wire-in.  You will also need to access the OEM CAN bus to keep the traction control and instruments working.