Purpleline Posted March 19, 2018 Report Posted March 19, 2018 Im new with the G4+. Tried to search around the forum about using r35 gtr MAF but found nothing. I still have the ecu sitting bcoz i want to ensure everything i needed before i go install and start the car. I understand that the ecu came with MAP but i really want to use the r35 MAF(adapter and evetything here ready) . So hopefully someone can share information about switching this instead of the build in MAP. Tks Quote
Brad Burnett Posted March 19, 2018 Report Posted March 19, 2018 you can feed the maf value into the ecu and monitor but the ecu will not be able to use it for a load reference Purpleline 1 Quote
Purpleline Posted March 19, 2018 Author Report Posted March 19, 2018 Opps... i thought they did.. i might just not doing my homework good enough. Good i already have IAT on the FMIC. But really surprise me it didnt support MAF as load Quote
cj Posted March 19, 2018 Report Posted March 19, 2018 Have a read of this post. Seems like it works but probably not preferred Purpleline 1 Quote
Adamw Posted March 20, 2018 Report Posted March 20, 2018 Note you will also need good calibration data for the MAF for it to be useful too. Purpleline 1 Quote
NAO Posted March 21, 2018 Report Posted March 21, 2018 I made a calibration table for R35 MAF.It seemed to work well and it could be implemented. Spec : Ej20g 12hole520cc Injector VF37-Twinscroll-turbo Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.