Jump to content

3sgte knock gain


Recommended Posts

I would also suggest changing to a common Bosch sensor.  There are quite a few different part numbers but the common one is 0 261 231 006.


Also a note about the gain.  On the main knock setup page the "channel gain" setting can only be adjusted in "whole number" increments of 1.  So 1 is the minimum setting that will work here.  However, if you go to the cyl setup page the individual cylinder gains have a resolution of 0.01 so you can use these to adjust the "volume" much more finely.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...