Rustam Posted April 11, 2020 Report Share Posted April 11, 2020 Why does mixture map not filling in comletely? By connecting via other laptop everything ok, but on my laptop it does not work. Both win7 What could be the cause? Quote Link to comment Share on other sites More sharing options...
Confused Posted April 11, 2020 Report Share Posted April 11, 2020 You probably have different Mixture Map settings between the two machines if you get a different result with the same log. The Mixture Map table will only show cells where you meet all the criteria. It isn't often that you'll fill a large amount of the table from a single log. Quote Link to comment Share on other sites More sharing options...
Rustam Posted April 11, 2020 Author Report Share Posted April 11, 2020 No, i've checked and compered. Other laptop registers much more data it seems like my one misses data for unknown reason and it can't log all data Are there any reasons for this to happen Quote Link to comment Share on other sites More sharing options...
remski2 Posted April 11, 2020 Report Share Posted April 11, 2020 Did you check the rate (Hz) for PC logging ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 11, 2020 Report Share Posted April 11, 2020 Provided you have the same tune loaded, the same log loaded and the same mixture map settings then you will get the same results. Quote Link to comment Share on other sites More sharing options...
Monsterbishi Posted April 13, 2020 Report Share Posted April 13, 2020 You probably have some extra log data loaded on one of the machines. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.