Talkwrench Posted June 29, 2017 Report Share Posted June 29, 2017 Quick question, is there anyway to customise the existing Transmit generic dash CAN data?I have an AIM MXS dash connected via CAN using the Transmit generic CAN data option. The stream inlcudes several parameters that arent applicable in a rotary engined application, can I change these and make use of DI channels? This would provide me more useable functions in the way of dash alarm functions. I've read the help files and noticed I could compile a user defined CAN format but was hoping this could be avoided by modifying the existing ones. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 29, 2017 Report Share Posted June 29, 2017 Quick question, is there anyway to customise the existing Transmit generic dash CAN data?You can't modify the preconfigured streams, normally you have to start from scratch. I do already have a configurable version of the generic dash stream that I can post here later when I'm at work. I think I also have some modified MXS configs that you can copy from. Talkwrench 1 Quote Link to comment Share on other sites More sharing options...
Talkwrench Posted June 29, 2017 Author Report Share Posted June 29, 2017 That would be awesome if you could share them, much appreciated. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 30, 2017 Report Share Posted June 30, 2017 (edited) Ok attached are a couple of files. The .lcs is a configurable version of our "generic dash stream", it has been modified a bit (the 8 knock channels have been removed). I have added DI2 status to the end of it so hopefully you can see how it is done. The .xc1 file is a matching custom CAN config for race studio 3.The Link end I think is easy enough to work out by trial and error. The AIM end is not quite so intuitive so I will post a couple of pics to explain the basics:Click the custom CAN button, then import, then browse for the .xc1 file: Once that is imported you can right click on it and select "open this custom can for editing" and you will get a screen like below with the whole message format showing. If you look down at the last frame you will see the DI2 status that I have added. If you double click on those DI2 bytes it will bring up an edit screen which is where you set the start bit, length, scaling etc. Have a play yourself, if you cant get it to work then reply here with the channels you need and I will try to set something up for you.Configurable Generic Dash - modified with DI2.lcsLINK_G4+ Generic + DI_@20170524_021339_007952.xc1 Edited June 30, 2017 by Adamw typo BEN_ADL_SIL80 and Talkwrench 2 Quote Link to comment Share on other sites More sharing options...
Talkwrench Posted June 30, 2017 Author Report Share Posted June 30, 2017 You're a star! I'll have a play with this over the weekend and see how far I get.Many thanks AdamRegards,Andrew Quote Link to comment Share on other sites More sharing options...
streetbike Posted January 30, 2020 Report Share Posted January 30, 2020 Hi all ! I have the same type of problem, I want to use the oil pressure switch as an alarm for my aim mxl strada , wich need race studio 2 software. the oil pressure switch is wire to DI7 on my ecu, and is used as a security check. how can I send this information to my dash ? thank you. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 1, 2020 Report Share Posted February 1, 2020 On 1/31/2020 at 11:15 AM, streetbike said: Hi all ! I have the same type of problem, I want to use the oil pressure switch as an alarm for my aim mxl strada , wich need race studio 2 software. the oil pressure switch is wire to DI7 on my ecu, and is used as a security check. how can I send this information to my dash ? thank you. The old MXL was not very configurable in the CAN side and you cant change units or scaling of any of the preconfigured ecu channels so it is quite limited in what we can do. I think we could probably do by substituting the "Trigger 1 error counter" channel with the DI oil switch. If you attach your ECU and dash config I will take a look when I get a minute. Quote Link to comment Share on other sites More sharing options...
streetbike Posted February 1, 2020 Report Share Posted February 1, 2020 Ok, so finally the most simple solution is wiring the Switch to an7 with a pullup resistor , off at 0v and on at 5v ! Do you think this Can work ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 2, 2020 Report Share Posted February 2, 2020 Assuming AN V 7 is set to one of the channels that is transmitted to the dash. I guess you cold set it as oil pressure... Quote Link to comment Share on other sites More sharing options...
1320MINI Posted February 10, 2020 Report Share Posted February 10, 2020 Hi Guy's I'm very new to the CAN system, I run a MINI LINK in my BMW MINI and i'm going to for the LINK AIM Dash. When we have fitted these dash's in the past the Traction Control is always disabled as it runs through the OEM Rev Counter which we replace. Is there any way to show on the dash: When launch control is activated ( currently on DI5) Through an LED and Message Send the Traction Control message to the dash. Can this be done? Many thanks for any help. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 12, 2020 Report Share Posted February 12, 2020 If you attach your ECU and dash configs I should be able to set this up. Quote Link to comment Share on other sites More sharing options...
1320MINI Posted March 1, 2020 Report Share Posted March 1, 2020 Adam, I'm starting with a fresh file in the ecu, I've set up the basic dash settings and Launch Control. Would it be possible to send a message to the dash regarding: Launch control active Traction Control deactivate. When we run a dash in the MINI the Traction is always deactivated as the system runs through the original Tach which is normally removed. Many Thanks BMW Mini R53 G4+ Xtreme Plugin dash CAN.pclr MXS 1.2 Strada LINK.zconfig Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 2, 2020 Report Share Posted March 2, 2020 Can you give a bit more detail about what you want to acheive with traction control, I dont understand what your actual problem is... Do you want the traction switch to turn the TC on/off in the Link ecu or something else? Quote Link to comment Share on other sites More sharing options...
1320MINI Posted March 2, 2020 Report Share Posted March 2, 2020 When you fire the car up the traction control is always on ( if set up in the ECU) Most MINI's have a DSC/ASC button to turn it off. When you remove the rev counter that shows the light that its disabled, its permanently disables the Traction control. So i was wondering if it can still be used on the OEM button and a message through the AIM Dash. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 3, 2020 Report Share Posted March 3, 2020 The info I have suggests the DSC on/off message comes from the "IKE" (instrument cluster module), is the "IKE" part of the "rev counter" that you remove? If you open the runtimes screen (F12) and go to the CAN tab does CAN DIG #4 turn on/off with the DSC switch? Quote Link to comment Share on other sites More sharing options...
1320MINI Posted March 3, 2020 Report Share Posted March 3, 2020 Just to update, The traction is still active, but when you disable it there is no indication. This is something i would really like to send to the dash. Weather it light a LED and or Display a message. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 3, 2020 Report Share Posted March 3, 2020 So you're saying the DSC switch is working now? You just want status displayed on dash? Quote Link to comment Share on other sites More sharing options...
1320MINI Posted March 3, 2020 Report Share Posted March 3, 2020 Yes mate. As well as the DI 5 which i have set as Launch control Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 4, 2020 Report Share Posted March 4, 2020 Try attached files. I have set up the dash warnings in a couple of different ways so you can choose what you like best. Traction is set up with a pop-up red screen and LED 2 will flash red. Launch is set up as a message in the info line and LED will be solid amber. Display page 4 has icons that turn on/off with traction and launch. You will need the latest Race studio 3 and latest firmware in your dash. BMWMiniR53G4XtremePlugin New CAN.pclr MXS 1.2 Strada 1320MINI.zconfig Quote Link to comment Share on other sites More sharing options...
1320MINI Posted March 8, 2020 Report Share Posted March 8, 2020 Hi Adam, Thank you for helping with this, I have the traction control working but don't have the Launch control coming through. Quote Link to comment Share on other sites More sharing options...
cHeMiCaL_ Posted November 23, 2020 Report Share Posted November 23, 2020 On 6/30/2017 at 3:43 PM, Adamw said: Ok attached are a couple of files. The .lcs is a configurable version of our "generic dash stream", it has been modified a bit (the 8 knock channels have been removed). I have added DI2 status to the end of it so hopefully you can see how it is done. The .xc1 file is a matching custom CAN config for race studio 3. The Link end I think is easy enough to work out by trial and error. The AIM end is not quite so intuitive so I will post a couple of pics to explain the basics: Click the custom CAN button, then import, then browse for the .xc1 file: http://i.imgur.com/zG2w0h0.png Once that is imported you can right click on it and select "open this custom can for editing" and you will get a screen like below with the whole message format showing. If you look down at the last frame you will see the DI2 status that I have added. If you double click on those DI2 bytes it will bring up an edit screen which is where you set the start bit, length, scaling etc. http://i.imgur.com/8leVWTk.png Have a play yourself, if you cant get it to work then reply here with the channels you need and I will try to set something up for you. Configurable Generic Dash - modified with DI2.lcs LINK_G4+ Generic + DI_@20170524_021339_007952.xc1 Hello @Adamw! I searched this forum to solve my MXP read-display problem and fortunately came across with this thread along with your wonderful solution. If you don't mind, can you please add the needful CAN IDs to read my ECUMaster's EGT2CAN (8 EGT sensors) that i hooked up to my G4+ Fury? I tried several times with your guidance and it doesn't seem to work, (which perhaps due to my lack of skills .) Attached are the screenshots of my parameters both from PCLink G4+ and ECUMaster EGT TO CAN. Appreciate your help in advanced, @Adamw. Really looking forward for your reply. rgds. E. Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 24, 2020 Report Share Posted November 24, 2020 8 hours ago, cHeMiCaL_ said: can you please add the needful CAN IDs to read my ECUMaster's EGT2CAN (8 EGT sensors) that i hooked up to my G4+ Fury? It is not clear what you want to do, as you mentioned both a Fury and a MXP dash. Do you want the EGT's in the ecu or dash? Or both? The instructions for setting up the ECU master EGT are in the help file and the CAN stream files are in PC Link CAN folder. Quote Link to comment Share on other sites More sharing options...
cHeMiCaL_ Posted November 24, 2020 Report Share Posted November 24, 2020 1 hour ago, Adamw said: It is not clear what you want to do, as you mentioned both a Fury and a MXP dash. Do you want the EGT's in the ecu or dash? Or both? The instructions for setting up the ECU master EGT are in the help file and the CAN stream files are in PC Link CAN folder. sorry to confuse @Adamw, yes i want the EGT to been seen in both. Currently I can see my EGTs in my ecu, but i cannot see in my dash. thanks for the help! Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 25, 2020 Report Share Posted November 25, 2020 Can you attach your ECU and dash config files and I will take a look. Quote Link to comment Share on other sites More sharing options...
cHeMiCaL_ Posted December 2, 2020 Report Share Posted December 2, 2020 Hi @Adamw, here you go. attached are my ecu and dash's config. feel free to add or change anything. Appreciate your help again. rgds. chemical_fury_021220.pclr chemical_mxs_strada.zconfig Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.