-
Posts
130 -
Joined
-
Last visited
-
Days Won
6
Reputation Activity
-
Tim D got a reaction from ClintBHP in CAN Lambda Error 54 Excess pump current
Clint,
Thanks for your advice, the new Lambda sensor did the trick, Lambda is spot on again!
Great service from BHP too.
-
Tim D reacted to Adamw in Subaru GC8 STI V6 Type RA - Engine Fan always on + idle at 1500 + Lambda not working
When you blip the throttle the idle valve will return to whatever position is in the base position table. If the base position table is incorrect then the engine RPM will settle outside of the control range so closed loop will never engage. It appears your base position table hasn’t been tuned at all. You need to switch idle control mode to open loop and tune the base position table properly before switching to closed loop. There is a guide in the help file.
-
Tim D reacted to Simon in knock detection device
Finally after far to long we have some recordings off the G4+ KnockBlock
These recordings are off our well abused 1UZFE VVT test engine.
Engine background noise.m4a
Mild Knock with bad tune.m4a
Severe Knock with bad tune.m4a
-
Tim D reacted to Adamw in mixture map vs autotune; road tuning only
Hi Rich,
Quick tune is really designed for steady state tuning on a dyno, mixture map is the tool you want for tuning from logs.
-
Tim D got a reaction from b3tuning in ''Laggy'' software
At last, my graphics issues are fixed, despite having latest geforce drivers, it was the windows setting for text scaling, it needs to be 100%, not 125%.
-
Tim D got a reaction from MagicMike in ''Laggy'' software
At last, my graphics issues are fixed, despite having latest geforce drivers, it was the windows setting for text scaling, it needs to be 100%, not 125%.
-
Tim D got a reaction from TechDave in ''Laggy'' software
At last, my graphics issues are fixed, despite having latest geforce drivers, it was the windows setting for text scaling, it needs to be 100%, not 125%.
-
Tim D got a reaction from mapper in ''Laggy'' software
At last, my graphics issues are fixed, despite having latest geforce drivers, it was the windows setting for text scaling, it needs to be 100%, not 125%.