Simon Posted December 10, 2019 Report Share Posted December 10, 2019 For those looking for a base map to have a play with. Software can be found at http://www.linkecu.com/pclink/PCLink 6.15.15.exe Monsoon FW 6.15.6.pclx cameronhall, Ducie54 and Davidv 1 2 Quote Link to comment Share on other sites More sharing options...
Davidv Posted December 11, 2019 Report Share Posted December 11, 2019 Thanks, was just about to ask. Haha Logging speed on the ECU screen only shows max of 1hz, 0.5hz, 0hz... Is the max logging speed any different to G4+? 100hz still ? Quote Link to comment Share on other sites More sharing options...
Simon Posted December 11, 2019 Author Report Share Posted December 11, 2019 Up to 1000Hz now available Davidv 1 Quote Link to comment Share on other sites More sharing options...
mikegt4dude Posted December 11, 2019 Report Share Posted December 11, 2019 Hi, Had a play around, there are a lot of changes that please me. Just wondering if Modelled Multi and Motorsport Traction control will return in a later version? Quote Link to comment Share on other sites More sharing options...
Davidv Posted December 11, 2019 Report Share Posted December 11, 2019 1000hz! Wow thats awesome +1 to the above, lots of awesome changes looking forward to having a play around when some of the bigger brother models become available. The math block functionality is just crazy. So many possibilities! mapper 1 Quote Link to comment Share on other sites More sharing options...
Leo Malcolm Posted December 11, 2019 Report Share Posted December 11, 2019 2 hours ago, mikegt4dude said: Hi, Had a play around, there are a lot of changes that please me. Just wondering if Modelled Multi and Motorsport Traction control will return in a later version? I was wondering the same thing in regards to the Modelled - Multi Fuel mode. As far as Traction Control is concerned, keep in mind it's the Monsoon file we're playing with...Traction Control won't be in there. Quote Link to comment Share on other sites More sharing options...
Davidv Posted December 11, 2019 Report Share Posted December 11, 2019 Just a note If you go to add calibration data to a sensor, use Cal table 1, if you space them apart at say 0.5v, 1v, 1.5v etc It ends up reverting to full numbers and then does weird stuff if you look at it in the map view by pressing K So the cal tables need some bug fixing to be usable (unless it's a quirk of this empty basemap) TechDave 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 11, 2019 Report Share Posted December 11, 2019 Hmm, good catch. It does actually work and display correct on a live ecu but they are going to have to fix that. Davidv 1 Quote Link to comment Share on other sites More sharing options...
TechDave Posted December 11, 2019 Report Share Posted December 11, 2019 Just fired it into the issue tracker, cheers @Davidv Davidv 1 Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted December 11, 2019 Report Share Posted December 11, 2019 Not sure if its just me but when i change individual fuel mode to table there appears to be no tables. If i select single a 2D table pops up. Quote Link to comment Share on other sites More sharing options...
TechDave Posted December 11, 2019 Report Share Posted December 11, 2019 @Ducie54 I get that if I haven't turned on a fuel mode yet. Switch on a fuel mode and you get it, I'll add a note to the engineers to show a message "no fuel mode selected...blah blah etc" mapper and Ducie54 1 1 Quote Link to comment Share on other sites More sharing options...
Rossobianconero Posted December 11, 2019 Report Share Posted December 11, 2019 I was trying to make a Nissan VVL (sr20ve) map, with dual Fuel map and ignition map, but you dont have the option to make the change from one map to the other with a output, Just virtual aux, di, candi, etc, but not the outputs like in the G4+, And the help file mension that you can use a output to trigger the change on the maps. I'm guessing that need to be fix. Quote Link to comment Share on other sites More sharing options...
TechDave Posted December 11, 2019 Report Share Posted December 11, 2019 1 hour ago, Rossobianconero said: I was trying to make a Nissan VVL (sr20ve) map, with dual Fuel map and ignition map, but you dont have the option to make the change from one map to the other with a output, Just virtual aux, di, candi, etc, but not the outputs like in the G4+, And the help file mension that you can use a output to trigger the change on the maps. I'm guessing that need to be fix. You can do this by way of a virtual aux, but I'll ask them to add the Aux/ign/inj outputs too. Quote Link to comment Share on other sites More sharing options...
Rossobianconero Posted December 11, 2019 Report Share Posted December 11, 2019 4 hours ago, TechDave said: You can do this by way of a virtual aux, but I'll ask them to add the Aux/ign/inj outputs too. yes you can get around that, but is a lot easier and faster to just have the ability to use an output like in the g4+, is not a bug, it would just be easier. Quote Link to comment Share on other sites More sharing options...
Simon Posted December 11, 2019 Author Report Share Posted December 11, 2019 18 hours ago, mikegt4dude said: Hi, Had a play around, there are a lot of changes that please me. Just wondering if Modelled Multi and Motorsport Traction control will return in a later version? Yep Multi fuel and traction control will be coming Leo Malcolm, Davidv and mikegt4dude 3 Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted December 12, 2019 Report Share Posted December 12, 2019 As a feature request can we have the option on which Lambda sensor is used for CLL. As example I'm using 5 lambda sensors. One in the turbo dump pipe and 4 in the turbo manifold using a CAN module. The software uses a average for CLL but would be nice to use Lambda one so manifold pressure is not an influence. Currently to get around this from happening I've set the 4 CAN lambdas as CAN TC. Laimis, mapper and Davidv 3 Quote Link to comment Share on other sites More sharing options...
Laimis Posted December 12, 2019 Report Share Posted December 12, 2019 11 hours ago, Ducie54 said: As a feature request can we have the option on which Lambda sensor is used for CLL. As example I'm using 5 lambda sensors. One in the turbo dump pipe and 4 in the turbo manifold using a CAN module. The software uses a average for CLL but would be nice to use Lambda one so manifold pressure is not an influence. Currently to get around this from happening I've set the 4 CAN lambdas as CAN TC. Agreed ! Also, individual Lambda closed loop control would be nice too. Pretty much sure the new microcontroler is capable now. mapper 1 Quote Link to comment Share on other sites More sharing options...
TechDave Posted December 13, 2019 Report Share Posted December 13, 2019 On 12/11/2019 at 1:02 PM, Rossobianconero said: I was trying to make a Nissan VVL (sr20ve) map, with dual Fuel map and ignition map, but you dont have the option to make the change from one map to the other with a output, Just virtual aux, di, candi, etc, but not the outputs like in the G4+, And the help file mension that you can use a output to trigger the change on the maps. I'm guessing that need to be fix. Done. On 12/11/2019 at 6:18 AM, Davidv said: Just a note If you go to add calibration data to a sensor, use Cal table 1, if you space them apart at say 0.5v, 1v, 1.5v etc It ends up reverting to full numbers and then does weird stuff if you look at it in the map view by pressing K So the cal tables need some bug fixing to be usable (unless it's a quirk of this empty basemap) Should also be fixed. Davidv 1 Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted December 13, 2019 Report Share Posted December 13, 2019 Is it possible to have a Math block drop down box with the maths all ready worked out? Leo Malcolm and Davidv 2 Quote Link to comment Share on other sites More sharing options...
Davidv Posted December 13, 2019 Report Share Posted December 13, 2019 That would be pretty cool! Like have a preset number of functions in there. Leo Malcolm 1 Quote Link to comment Share on other sites More sharing options...
marc kelsey Posted January 10, 2020 Report Share Posted January 10, 2020 Hi guys, is there some special way to unlock all the AUX outputs, DI and AN inputs on the basemaps??? I would like to set mine up before plugging it in. Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 10, 2020 Report Share Posted January 10, 2020 11 hours ago, marc kelsey said: Hi guys, is there some special way to unlock all the AUX outputs, DI and AN inputs on the basemaps??? I would like to set mine up before plugging it in. For what ecu? Quote Link to comment Share on other sites More sharing options...
rotortorque Posted January 15, 2020 Report Share Posted January 15, 2020 do you have rotary base map for g4x please to have a look around Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 18, 2020 Report Share Posted January 18, 2020 Example attached. Note this is not from a running engine, just something I threw together. Rotary Example map.pclx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.