Speshi Racing Posted January 14, 2020 Report Share Posted January 14, 2020 I want to to shift from gear using my horn button, it must kill the engine and up shift the poke. When I press on my horn button I can see the in the Storm ECU the Digital Input 4 turning green. But the poke is not working and also not killing the engine. Is there a diagram how to wire it correctly? Quote Link to comment Share on other sites More sharing options...
Simon Posted January 14, 2020 Report Share Posted January 14, 2020 The Di input can take a ground signal or a 12V input. The help file in the PC link tuning software covers the physical wiring. You will need to assign the gear shift /cut to the Di input and then also have an Aux output assigned to control the shift solenoid. Quote Link to comment Share on other sites More sharing options...
Speshi Racing Posted January 21, 2020 Author Report Share Posted January 21, 2020 Hi Simon, I'm trying to set it up. DI4 is my trigger button, A3 is my Air Shifter Valve. I expect when trigger DI4 that A3 will activate. That is not the case, not sure what I'm doing n wrong. Is it something you can see in my file? PCLink G4+ STORM-20190302-GSXR1000-NITROUS-2020.pclr Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted January 21, 2020 Report Share Posted January 21, 2020 Do you see the DI change status in the runtime values? Quote Link to comment Share on other sites More sharing options...
Speshi Racing Posted January 21, 2020 Author Report Share Posted January 21, 2020 4 hours ago, Brad Burnett said: Do you see the DI change status in the runtime values? Hi Brad, Yes on push it turns green - Active. I have Aux 3 - Air Shifter Valve set on Shift Light PVM, While testing On/ Off it activate. Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 21, 2020 Report Share Posted January 21, 2020 If you want Aux 3 to activate whenever you hit DI4, then below would be how it should be set up. Quote Link to comment Share on other sites More sharing options...
Speshi Racing Posted January 23, 2020 Author Report Share Posted January 23, 2020 On 1/21/2020 at 8:24 PM, Adamw said: If you want Aux 3 to activate whenever you hit DI4, then below would be how it should be set up. Thanks everyone, I'm new and finding my way and this forum is very useful. Quote Link to comment Share on other sites More sharing options...
Greg W Posted January 23, 2020 Report Share Posted January 23, 2020 I would add an extra condition so you dont bump the shift at the wrong time (like key on not running) and bend the shift fork , something like rpm or speed related Quote Link to comment Share on other sites More sharing options...
Speshi Racing Posted January 23, 2020 Author Report Share Posted January 23, 2020 1 hour ago, Greg W said: I would add an extra condition so you dont bump the shift at the wrong time (like key on not running) and bend the shift fork , something like rpm or speed related Thanks for the advice I will do some research and set some extra conditions . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.