Mike928 Posted April 6 Author Report Share Posted April 6 On 3/28/2024 at 6:59 PM, Mike928 said: Will do Adam but I have no coolant in it at the moment, so it will not be at NOT. Adam, here you go, map and a cold start log with all boxes ticked. No coolant at the moment, so it was a short run. Note; the EGT#1 is not reading and I've not hunted that down yet and I don't think the knock sensors are setup yet. They are 2 Bosch units on the floor of the valley as fitted to a few different Porsche models I think. https://drive.google.com/file/d/1x4rF2i8ZCNi-ZpLWRMo-_-56dkF08qdU/view?usp=sharing https://drive.google.com/file/d/1b_Jp3UEujMb_-564a-R85DezU4E847Nv/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Mike928 Posted April 13 Author Report Share Posted April 13 On 4/6/2024 at 1:06 PM, Mike928 said: Adam, here you go, map and a cold start log with all boxes ticked. No coolant at the moment, so it was a short run. Note; the EGT#1 is not reading and I've not hunted that down yet and I don't think the knock sensors are setup yet. They are 2 Bosch units on the floor of the valley as fitted to a few different Porsche models I think. https://drive.google.com/file/d/1x4rF2i8ZCNi-ZpLWRMo-_-56dkF08qdU/view?usp=sharing https://drive.google.com/file/d/1b_Jp3UEujMb_-564a-R85DezU4E847Nv/view?usp=sharing Adam, are these attachments what you need? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 13 Report Share Posted April 13 I have made some small adjustments that will hopefully be a step in the right direction. I have turned off over-run fuel cut for now as that was some of the cause of the stall during initial starting. I would usually only enable this near the end of the tuning process. You can use the file compare function to highlight other changes. G4+_928_6L_1 start and idle adjustments.pclr Quote Link to comment Share on other sites More sharing options...
Mike928 Posted April 17 Author Report Share Posted April 17 On 4/13/2024 at 10:12 PM, Adamw said: I have made some small adjustments that will hopefully be a step in the right direction. I have turned off over-run fuel cut for now as that was some of the cause of the stall during initial starting. I would usually only enable this near the end of the tuning process. You can use the file compare function to highlight other changes. G4+_928_6L_1 start and idle adjustments.pclr 173.23 kB · 1 download Adam, thanks heaps! It starts up with no pedal, revs well and drops back to idle beautifully. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.