neil brown Posted December 6, 2015 Report Share Posted December 6, 2015 looking in using the spare 0-5v input to switch maps settings on a rotary switchwith a 6 position with 0,1,2,3,4,5v output so i can free up some digital inputs is it possible to do as cant see how to set it up on the software Quote Link to comment Share on other sites More sharing options...
Scott Posted December 7, 2015 Report Share Posted December 7, 2015 (edited) Hi Neil,It is possible to do this, but you will need to do it in conjunction with a Virtual Aux channel. For example, you could make Virtual Aux 1 switch on if Analog Voit 1 is reading 1 to 2v. Virtual Aux 1 would then activate Ign table 2, Fuel table 2, and Boost target table 2.You will need to use a Virtual Aux channel for each 'position' of the Analog Volt channel rotary switch. Edited December 7, 2015 by Scott Quote Link to comment Share on other sites More sharing options...
neil brown Posted December 7, 2015 Author Report Share Posted December 7, 2015 how do i set this up so i have 3 virtual aux Quote Link to comment Share on other sites More sharing options...
Simon Posted December 8, 2015 Report Share Posted December 8, 2015 The switch will give 6 different voltages.With 3 virtual aux available you can have the equivalent of 3 DI inputs.You would set the voltage conditions for each virtual aux to suit your switch and then select what you want switched based on the virtual aux. Quote Link to comment Share on other sites More sharing options...
Scott Posted December 8, 2015 Report Share Posted December 8, 2015 Simon is correct, you can only have 3 additional 'conditions' on top of your base tune.Here is a quick little example video of how you might do it.https://vdoubleyou-scott.tinytake.com/sf/NDA5MTk1XzIyNTg1ODYIn the video if Analog Volt Input 1 sees 1.0 to 2.0 volts it will activate Virtual Aux 1, which will then switch on the 4D fuel table. If Analog Volt Input 1 sees 2.0 to 3.0 volts it will activate Virtual Aux 2, which will then switch on the 5D fuel table.You can configure the Virtual Aux channels as required to suit the output voltage of your switch. You can also activate many other tables in addition to the 4D and 5D fuel tables. Quote Link to comment Share on other sites More sharing options...
neil brown Posted December 8, 2015 Author Report Share Posted December 8, 2015 ok thanks for that how do i do it with switching 3 boost tables Quote Link to comment Share on other sites More sharing options...
Simon Posted December 8, 2015 Report Share Posted December 8, 2015 When you select the 3 table option in the boostcontrol settings. It will ask for table activation for tables 2 and 3 (table 1 is the default table)You will set the activation to be you virtual aux. Quote Link to comment Share on other sites More sharing options...
Typ17 16vg60 Posted July 18, 2017 Report Share Posted July 18, 2017 Hi, Have you test it so? Is it work? I have a g4+ xtreme, I want to install the ecu in winter. So what I can set in the software before, I will do it.. Greetings Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 19, 2017 Report Share Posted July 19, 2017 Hi, Have you test it so? Is it work? I have a g4+ xtreme, I want to install the ecu in winter. So what I can set in the software before, I will do it.. Greetings Yes, if you have a G4+ then it is a bit more flexible than the examples above as you now have 8 virtual auxiliaries and you can also directly use analog voltages as conditions for some tables etc. Quote Link to comment Share on other sites More sharing options...
Typ17 16vg60 Posted July 23, 2017 Report Share Posted July 23, 2017 OK thanks for answerI'm new to work with digital in etcAnd again, very great firm and forum. Quote Link to comment Share on other sites More sharing options...
artjoms19 Posted April 21, 2020 Report Share Posted April 21, 2020 i am attempting to do a map switch using the IDA software but when i load the file it only shows only zeros. can anyone help please? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 24, 2020 Report Share Posted April 24, 2020 On 4/22/2020 at 12:43 AM, artjoms19 said: i am attempting to do a map switch using the IDA software but when i load the file it only shows only zeros. can anyone help please? Huh? Is this a Link ECU? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.