Roshitha Posted June 7, 2017 Report Share Posted June 7, 2017 Hi,I'm working on a project Nissan micra K11 CG10DE engine and i'm trying to install Link G4+ Atom ECU.but the problem is My Micra triger patern does not show in the software.also i searched everywhere to download a user manual and a wiring diagram for this G4+ Atom but i did not found.if someone can help me on this it would be much appreciated. thank you. Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted June 7, 2017 Report Share Posted June 7, 2017 We are doing something similar.There is apparently a similar trigger already in the presets... Hopefully Simon will recall which one it is as I've forgotten! Quote Link to comment Share on other sites More sharing options...
Simon Posted June 8, 2017 Report Share Posted June 8, 2017 The Daihatsu Copen 660cc JB-DET has a very similar patter but reluctor based rather than opto.But this should not be an issue just a case of changing the sensor type to Reluctor when configuring for the Micra Quote Link to comment Share on other sites More sharing options...
Roshitha Posted June 8, 2017 Author Report Share Posted June 8, 2017 Hi,thank you for the quick replies. But will i be qble to run sequential ignition with this trigger pattern Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 8, 2017 Report Share Posted June 8, 2017 Yes the ECU will have 720deg sync using this type of pattern so sequential will be possible. Quote Link to comment Share on other sites More sharing options...
Antonis Kogkas Posted June 12, 2017 Report Share Posted June 12, 2017 Since I am doing a similar setup. Will this trigger patern also be enough for a Coil On Plug conversion? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 12, 2017 Report Share Posted June 12, 2017 Since I am doing a similar setup. Will this trigger patern also be enough for a Coil On Plug conversion?yes. Antonis Kogkas 1 Quote Link to comment Share on other sites More sharing options...
Fintank11 Posted June 10, 2020 Report Share Posted June 10, 2020 Hi , did you ever get this going ? Doing the same to mine Quote Link to comment Share on other sites More sharing options...
Richard Hainsworth Posted August 18, 2021 Report Share Posted August 18, 2021 Hey team I and helping a friend wire a monsoon onto the same engine. Does anyone have a pinout for wiring the trigger to the dizzy? We are running Honda k20 cop coils too. Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 18, 2021 Report Share Posted August 18, 2021 What's the plug look like on the dizzy? Does it originally have the coil and ignitor built-in? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.