mapper

Yes I had also to readjust and now click on the Layout dropdown menu at the top and choise with the mouse the right tab. I also work with the keys to go throuh pages. But with around 15 pages not easy. Passwort protection for just some maps would be great! Maybe a list where you can choose what Maps should be protected would do the job quite well. We must really allow to clear fault codes also when passwort protection is active.Because i often have to check loggs from my customers remoutly after they get the CEL light on. If everything looks ok, the must be able to clear the CEL without giving out the passwort. I have alot of customers far away from my workshop. They can't make a huge travel just to reset the CEL.

I thought you may not share temp sensor signals, because it will disturb the signal. Voltage shouldn't be a problem, because voltage channels have a very high input resistance.

Plus one

Why not just use a PWM table on a AUX with speed input as axis? bit fussy to calibrate, but should work.

Absolutly great! big enprovement above the last Storm. I just wondering now what's the difference to the G4+ Extreme ECU, except a few less inputs and one knock channel less? Would be great if you can make a comparison chart and post it on the website. Besides, I'm still missing the old G3 Pinouts and Manuals on the website.

Plus one for 3D maps!

Plus one for that, since every customer can do that on an OEM ECU and i don't think we should give the customer the feel that a LINK ECU limits him more than the factory one. The opposite are the driving argument to go for a standalone. Maybe a option to just reset the light and leave the errors in the event manager could be a good option, too.

Yes please post them :-) Simon, you should have a look on microsoft viso. Many companies use it to draw motorsport harnesses. In the beginning it can be timing consuming to draw templates, forms and parts. After that it's okay and possible to make nice diagrams.

Good idea, that would save some time, sice it wouldn't be necessary anymore to install a second knock sensor to verified knock with a external audio device. Wouldn't be possible to just plugin earphones to the PC?

Hi Simon Can you elaborate this, please. For what OHM range should a 10kohm resp. 1kohm pull-up be used?

First, check all ground points and get sure, that all devices have the same ground. Second, i found the AEM widebands are very inaccurate. The read on low AFR values much too rich and on high afr's much too lean. And there is not seldom more than 0.5 AFR difference. I always calibrate them against my Dynapack wideband (MOTEC PLM), which I think is very trustworth.

I wondering why they not just add 100mb or 1GB with storage capacity that cheap nowadays. Or maybe an USB port to stor the data like AEM does it.

Can you elaborate that? Do you measure rpm at gearbox? any links to such sensors?

OR you can use a Microsoft based tabled. Something like MS Surface and run PC-Link on it to logg and Show all the data.

Hi Unfortunately the G3 Wiring Help file doesn't work in the V3.40 PC-LINK and the Pinouts which was listed at the old website are not any longer aviable on the new website. I need very urgently a ECU header pinout for the G3. Will be great if someone can post a picture.

Regarding gear trim table: I want gear trim just in some of the maps and not all. The gear trim table are applied globaly to all WG tables. There is no option to activate it just for one WG table and I already use the WG target y-axis already for other things like TPS based boost or turn knob voltage for different boost levels.

Hi good thing to have options :-) What are the cost of this unit and where I can buy it?

Yes, its more or less a plug and play solution. You can find the CAN settings in the PC-Link Help file. I sent such a unit to Electonz a few months ago and they worked out the CAN protocol.

Ok great. thanks Simon. Can you add that to the help file, please? It's sometimes a bit difficult to see which ECU has which features and connectors. As example LINK says that Plugin for cars which don't have a MAP senso from factory, has an inbuilt one. Problem is as an example JDM supras or Evo's do have a Map sensor from factory, but the EDM modells not. So a comparison chart will be helpfull.

Hi Jason Okay, thanks for clarification. Personaly I'm not involved into drag racing, so I have never had a request for such an ultimate ECU. But i can understand your reasons.

one other question how many expansion connecters does the newest version Supra Plugin have? one or two? will be very kind if you could send me this map. Sound interessting to have a look on it.

agree, but in many cases the Plugins are just simpler and can save alot of work.

Yes Dave, I can image how much work are behind, and I love it that bugs on Electronz products are very seldom. Think they invest a lot into testing before release of new firmware. Thats a thing I really appreciate about this products. Just read through the first posts on this thread. Seams like some letters get lost or wrong with the transfer of old forum threads to the new forum. Ok maybe it's also my bad english ;-) Your experimenting with GPS sounds interessting. Please let me/us know if you found a usefull solution. thanks Regards Adrian

haha yes Sir, Furry's are great! I will also wire in one into my personal skyline as soon i find the time. Sounds interessting, I would love to hear some comparison results! Regards Adrian

Janson why not just add a Dash 2 pro or something similary. CAN will transfer around 80 parameters which than can be downloaded from the dash logger. I found for cirquite race I helps alot to have GPS data aviable to better understand the logs. I also wondering for what more than 25 channels should be needed? but I'm sure you can give me a small lesson on that ;-) Besides, you mentioned 8 analoge EGT iputs. Why stick with old technic. Have a look a the Megasquirt CAN EGT amplifier. I sent such a unit to LINK a few month ago for CAN dissasembling. On newer PC-LINK softwares you just have to chooise the preconfigured CAN setup for the unit and it will work straight away. CAN transmission is much more accurate than analoge. Nevertheless there are also 8 analoge outputs on the unit if you stll prefer that. Additional you can connect an LC-2 or a whole Innovate chain to the unit and transmitt it to the ECU. It's a really nice unit with a very competitive price.