wastegate Posted November 18, 2023 Report Share Posted November 18, 2023 Would love to be able to set the voltage thresholds on the DIs.. at the moment there is no way to change the trigger point. Background, using ABS wheel speed sensors, some sensors not picking up a trigger till 40kph. Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 18, 2023 Report Share Posted November 18, 2023 Yes we will have some DI's with adjustable thresholds in a future ECU, but all our current ECU's have the thresholds set by hardware. mapper and dx4picco 2 Quote Link to comment Share on other sites More sharing options...
koracing Posted November 20, 2023 Report Share Posted November 20, 2023 Isn't there an external analog circuit that could be added to adjust thresholds - pullup/pulldown type? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted November 20, 2023 Report Share Posted November 20, 2023 I haven't used these myself yet but friends have with good success. https://sirhclabs.com/product/vr-to-hall-sensor-converter-dual-channel/ essb00 1 Quote Link to comment Share on other sites More sharing options...
wastegate Posted November 21, 2023 Author Report Share Posted November 21, 2023 Yeah Vaughan I was going to use a couple of those, but they don't tend to ship international to us in ANZ unless it's a bigger purchase. I ended up purchasing a Motec DMCD for $100AU that "should" do what I want. Quote Link to comment Share on other sites More sharing options...
wastegate Posted December 17, 2023 Author Report Share Posted December 17, 2023 On 11/21/2023 at 11:09 PM, wastegate said: Yeah Vaughan I was going to use a couple of those, but they don't tend to ship international to us in ANZ unless it's a bigger purchase. I ended up purchasing a Motec DMCD for $100AU that "should" do what I want. Just an update, the DMCD works great with the Toyota ABS sensors. Only have the left side wheel speeds hooked up for now as I only had 2 wire shielded cable spare. RR is from the speed output from the ABS ecu itself. RF not connected currently. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.