claudiumxg Posted August 30, 2018 Report Share Posted August 30, 2018 Thank you!! Looking forward for it, we are waiting here for this for 2 years now Link to comment Share on other sites More sharing options...
DOLFO Posted August 30, 2018 Report Share Posted August 30, 2018 I had FW 5.6.5 updated to 5.6.6 till now no problems. I have a race next week should I downgrade it back to 5.6.5 or I can keep 5.6.6? thanks Link to comment Share on other sites More sharing options...
Adamw Posted August 30, 2018 Report Share Posted August 30, 2018 5 hours ago, DOLFO said: I had FW 5.6.5 updated to 5.6.6 till now no problems. I have a race next week should I downgrade it back to 5.6.5 or I can keep 5.6.6? thanks You are fine. For those that do have problems it is very obvious, ecu will be disabled/locked and engine wont run. DOLFO and AbbeyMS 2 Link to comment Share on other sites More sharing options...
DOLFO Posted September 2, 2018 Report Share Posted September 2, 2018 On 8/31/2018 at 1:37 AM, Adamw said: You are fine. For those that do have problems it is very obvious, ecu will be disabled/locked and engine wont run. Thanks ....... I have done two ECU's and both work just fine. Link to comment Share on other sites More sharing options...
Dean Posted September 10, 2018 Report Share Posted September 10, 2018 Is there any word on when the update will be re-released? My tuner updated my ecu's firmware when it was on the dyno 2 weeks ago and I haven't been able to connect to it since because I don't have 5.6.6 on my laptop. Thanks Link to comment Share on other sites More sharing options...
Simon Posted September 10, 2018 Report Share Posted September 10, 2018 Should be in the next day or two. Link to comment Share on other sites More sharing options...
StijnFSP Posted September 16, 2018 Report Share Posted September 16, 2018 On 9/10/2018 at 5:10 AM, Simon said: Should be in the next day or two. its 6 days past that date any news ? need it also for a new laptop Drexal 1 Link to comment Share on other sites More sharing options...
Simon Posted September 17, 2018 Report Share Posted September 17, 2018 Should being the key element in that. We have put in a couple of other fixes so taking a little longer. But it is very close I have been running a test version for a few days now and all seems happy. DOLFO 1 Link to comment Share on other sites More sharing options...
HB Posted September 19, 2018 Report Share Posted September 19, 2018 Does the update also contain the fix for the DBW throttle idle? Link to comment Share on other sites More sharing options...
flipski Posted September 22, 2018 Report Share Posted September 22, 2018 FYI, in future release, could you please update the basemaps for nissan 350z IAT fuel trim table. Sorry if I posted in wrong thread. Link to comment Share on other sites More sharing options...
Adamw Posted September 22, 2018 Report Share Posted September 22, 2018 12 hours ago, flipski said: FYI, in future release, could you please update the basemaps for nissan 350z IAT fuel trim table. Sorry if I posted in wrong thread. Im pretty sure that map was done by High Performance Academy, I assume since it is a NA car and wouldnt normally have running intake temps above about 30°C, the enrichment at high intake temps is done intentionally to compensate for hot start heat soak. Link to comment Share on other sites More sharing options...
flipski Posted September 23, 2018 Report Share Posted September 23, 2018 3 hours ago, Adamw said: Im pretty sure that map was done by High Performance Academy, I assume since it is a NA car and wouldnt normally have running intake temps above about 30°C, the enrichment at high intake temps is done intentionally to compensate for hot start heat soak. Thanks for the feedback. I guess this should be part of another thread. Link to comment Share on other sites More sharing options...
claudiumxg Posted October 2, 2018 Report Share Posted October 2, 2018 Hi, Any news on release date? Thank you Link to comment Share on other sites More sharing options...
ronzefferion Posted October 2, 2018 Report Share Posted October 2, 2018 Need this update ASAP any news on how long ?????????? Link to comment Share on other sites More sharing options...
Simon Posted October 3, 2018 Report Share Posted October 3, 2018 I assure you all we will let you know once we have it out. Would rather have it all well sorted so we don't make the same mistake again. Ttpcar 1 Link to comment Share on other sites More sharing options...
STY Posted October 22, 2018 Report Share Posted October 22, 2018 Guys, can you update the Pin Function for Tacho in the Help Manual and default for Base Map on WRXLink 7-9 its incorrect, should be IGN5 for Tacho not AUX4 (later HW revisions?) Link to comment Share on other sites More sharing options...
Adamw Posted October 22, 2018 Report Share Posted October 22, 2018 52 minutes ago, STY said: Guys, can you update the Pin Function for Tacho in the Help Manual and default for Base Map on WRXLink 7-9 its incorrect, should be IGN5 for Tacho not AUX4 (later HW revisions?) Yep thats been done in 5.6.6. The manuals on the respective ECU page on our website should always have the most up to date pinouts. The base map that we send out in the ECU should be set up correct as far as I know, are you saying its not? Link to comment Share on other sites More sharing options...
STY Posted October 22, 2018 Report Share Posted October 22, 2018 Unless its only been updated in 5.6.6 (i had to revert to 5.6.5:3338) my base maps are still showing AUX4 -Tacho for: Subaru WRX V7 G4+ Xtreme Plugin.pclr with a date of 24/08/2016 Link to comment Share on other sites More sharing options...
Adamw Posted October 22, 2018 Report Share Posted October 22, 2018 1 hour ago, STY said: Unless its only been updated in 5.6.6 (i had to revert to 5.6.5:3338) my base maps are still showing AUX4 -Tacho for: Subaru WRX V7 G4+ Xtreme Plugin.pclr with a date of 24/08/2016 The ECUs are being shipped out with the correct map already loaded in them. The 5.6.5 basemap is set up wrong as that was from before the hardware change. Yes all the basemaps have all been updated in 5.6.6 to cover hardware changes, firmware changes and a few mistakes that have been reported. Link to comment Share on other sites More sharing options...
MeikVr6 Posted October 23, 2018 Report Share Posted October 23, 2018 Hello When come your new final Update? Have your update a better PID Boost controller? BR Meik Link to comment Share on other sites More sharing options...
Decs Posted October 26, 2018 Report Share Posted October 26, 2018 On 10/23/2018 at 10:28 PM, MeikVr6 said: Hello When come your new final Update? Have your update a better PID Boost controller? BR Meik I am curious to know what you would change? The only thing that springs to mind for me would be the option to keep D active during stage 3 and perhaps give P, I, and D tables rather than single values. Link to comment Share on other sites More sharing options...
StijnFSP Posted October 30, 2018 Report Share Posted October 30, 2018 any new on release date ?? Link to comment Share on other sites More sharing options...
MeikVr6 Posted October 30, 2018 Report Share Posted October 30, 2018 Thanks for your Replay. The Problem is her good described. https://www.hpacademy.com/forum/boost-control/show/link-g4-closed-loop-boost-control?fbclid=IwAR1ESPrZm92NX9msDSbn4Xx43H0bDkwqGQLw-HwHnYE7dAH4rW4uiYyTngA BR Meik Link to comment Share on other sites More sharing options...
Simon Posted October 30, 2018 Report Share Posted October 30, 2018 We are aware there can be improvements made to boost control but it is a major undertaking so is not likely to be done for some time. Link to comment Share on other sites More sharing options...
MeikVr6 Posted November 2, 2018 Report Share Posted November 2, 2018 That is bad... Link to comment Share on other sites More sharing options...
Recommended Posts