impellerhead Posted March 24, 2016 Report Share Posted March 24, 2016 I found this: http://gaugeart.com/product/gaugeart-analog-to-can-converter/Can I set this up with the Link G4+ and if so how do I do it?Or are there other cheap Analog to Can converters that will work ? Quote Link to comment Share on other sites More sharing options...
Zefy Posted March 25, 2016 Report Share Posted March 25, 2016 I asked this once as well and wondering if the latest firmware updates have brought some solutions for this. When I asked before, the basic answer was sort of, not really. Apparently the ecu is capable of seeing the signal and logging it, but it will only give you voltages and channel numbers. No labels, no scaling with units, and not able to use the signals for anything internal to the ecu. There are many devices like that though on the market. The SSI from innovate gives 4 analog inputs with a CAN pass through and there is also a 4 channel thermocouple version. https://www.diyautotune.com/product/innovate-motorsports-ssi-4-simple-sensor-interface-system-3783/#description PLX devices makes sensor modules that can be daisy chained together. This is the system that I have that I would really like to incorporate into my vipec and be able to use my oil pressure/temp and egt to trigger some failsafes in the ecu over CAN without eating up inputs I don't have. http://www.plxdevices.com/category-s/109.htm Haltech also makes an IO expander that has 4 analog, 4 digital, and 4 outputs that connects to their ecus over CAN. Megasquirt has a kit that is almost identical to this that you can customize. http://www.haltech.com/product/can-devices/haltech-io-expander-12/https://www.diyautotune.com/product/can-egt-8-channel-thermocouple-interface/https://www.diyautotune.com/shop/megasquirt-kits-components/gpio-boards/ I think all the motec datalogger stuff can do this sort of thing too that allows for usable inputs to the ecu...? Really hoping that incorporating something like this into link or vipec is an option at some point. I need more inputs! muzzytt 1 Quote Link to comment Share on other sites More sharing options...
impellerhead Posted March 25, 2016 Author Report Share Posted March 25, 2016 I am using the KMS EGT Can module, why wouldn't this analog input box work ? Quote Link to comment Share on other sites More sharing options...
Scott Posted March 29, 2016 Report Share Posted March 29, 2016 Hi all,The Link G4+/Vi-PEC iSeries CAN is customisable by the user, and so most CAN devices should be able to be supported. Looking at the GaugeArt device I can't see why it could not be supported. If there was a problem we are happy for you to send the device to us so we can determine the settings and make it easier for customers in the future.Some of the devices are already supported by us with setup files or instructions.Check out PCLink Help > G4+ ECU Tuning Functions > CAN > Device Specific CAN Information Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted March 29, 2016 Report Share Posted March 29, 2016 I'm using this one over CAN.http://www.turbofast.com.au/TFelectronics/PageFiles/CAN_EGT_Amp.html Quote Link to comment Share on other sites More sharing options...
mapper Posted March 29, 2016 Report Share Posted March 29, 2016 Hi Scott, just spotet the link-can Lambda. Is a new product comming or does it just refering to the internal lambda? Quote Link to comment Share on other sites More sharing options...
Scott Posted March 30, 2016 Report Share Posted March 30, 2016 Good spotting Quote Link to comment Share on other sites More sharing options...
muzzytt Posted March 30, 2016 Report Share Posted March 30, 2016 So something like the haltech will work with the fury ? I would love some extra di Quote Link to comment Share on other sites More sharing options...
Scott Posted March 31, 2016 Report Share Posted March 31, 2016 Possibly. The problem with the haltech CAN devices I have seen is that they do not publish the CAN data layout, so trying to configure your vi-pec/link to suit is not easy. However if you can get the data then no reason it shouldn't work. Also other manufacturers produce units that are able to be used (Motec E888, etc) muzzytt 1 Quote Link to comment Share on other sites More sharing options...
dmacnz Posted March 31, 2016 Report Share Posted March 31, 2016 Im willing to buy the gauge sport device and send it to Link to get the Can protocols done!!I am running a plug in G4+ and in dire need of some more inputs!!!Hi all,The Link G4+/Vi-PEC iSeries CAN is customisable by the user, and so most CAN devices should be able to be supported. Looking at the GaugeArt device I can't see why it could not be supported. If there was a problem we are happy for you to send the device to us so we can determine the settings and make it easier for customers in the future.Some of the devices are already supported by us with setup files or instructions.Check out PCLink Help > G4+ ECU Tuning Functions > CAN > Device Specific CAN Information Quote Link to comment Share on other sites More sharing options...
Scott Posted April 1, 2016 Report Share Posted April 1, 2016 Im willing to buy the gauge sport device and send it to Link to get the Can protocols done!!I am running a plug in G4+ and in dire need of some more inputs!!!Hi dmacnz, Are you talking about the gauge art one, or something different? I had a look at the gauge art analog to CAN converter, it looks like it may not be available yet. Quote Link to comment Share on other sites More sharing options...
dmacnz Posted April 1, 2016 Report Share Posted April 1, 2016 (edited) Hi dmacnz, Are you talking about the gauge art one, or something different? I had a look at the gauge art analog to CAN converter, it looks like it may not be available yet.Seems it is available, I think they will be in touch with Link! Keen to give this a go! Edited April 1, 2016 by dmacnz Quote Link to comment Share on other sites More sharing options...
Scott Posted April 1, 2016 Report Share Posted April 1, 2016 Good. If they can provide us with the CAN data layout that would make a good starting point. Quote Link to comment Share on other sites More sharing options...
impellerhead Posted April 4, 2016 Author Report Share Posted April 4, 2016 Sounds promising ! Please let us know as soon it's confirmed that it works. Quote Link to comment Share on other sites More sharing options...
gaugeART Posted April 14, 2016 Report Share Posted April 14, 2016 Good. If they can provide us with the CAN data layout that would make a good starting point.hi Scott --Thank you for your offer to help. It sounds like our Analog to CAN Converter would be compatible with your ECU and a great addition! Please send us an e-mail ([email protected]) so we can provide the required CAN layout.By the way - I know Link / Vipec customers are already using our gaugeART Video Gauge Adapter with your ECUs and love it. Thank you again for the support! Skeeed3r 1 Quote Link to comment Share on other sites More sharing options...
gaugeART Posted April 20, 2016 Report Share Posted April 20, 2016 Scott @ Link was kind enough to setup a template for our device in the Link software to allow the gaugeART Analog to CAN Converter to be compatible. @Impellerhead is installing a unit with his G4+. If you are interested, please drop us an e-mail! Quote Link to comment Share on other sites More sharing options...
Scott Posted April 21, 2016 Report Share Posted April 21, 2016 Hi guys,I've put together some Link CAN stream files to support the gaugeART analog to CAN device. I don't have access to the actual device, so if someone (impellerhead?) has one and can test this it would be appreciated. Here is a quick rough video showing how to set it up on the ECU end of things:https://vdoubleyou-scott.tinytake.com/sf/NjA2MTcyXzMwMTc0NTQAttached are the CAN stream files required. Thanks to Chris at gaugeART for providing the data and support required.gaugeART Analog to CAN - ID 1313.lcsgaugeART Analog to CAN - ID 1312.lcs Quote Link to comment Share on other sites More sharing options...
dmacnz Posted April 29, 2016 Report Share Posted April 29, 2016 Awesome news, Just ordering one now! Hopefully now will have enough inputs for E-throttle!! Quote Link to comment Share on other sites More sharing options...
MagicMike Posted April 12, 2017 Report Share Posted April 12, 2017 Just did a search for SSI-4 and found this thread. I have an Innovate SSI-4 that I purchased to use with the Adaptronic ECU I had previously. Never used it, not really worth my time/loss to sell it.Can it be put to any use whatsoever with the G4+ plug in I have? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 12, 2017 Report Share Posted April 12, 2017 Unfortunately no. The innovate stuff is serial only, not CAN bus. Quote Link to comment Share on other sites More sharing options...
MagicMike Posted April 12, 2017 Report Share Posted April 12, 2017 Oh well, thanks for the reply Quote Link to comment Share on other sites More sharing options...
Purpleline Posted March 16, 2018 Report Share Posted March 16, 2018 Im new here but wonder if the PLX SM-AFR Wideband the TX/RX port can be input to g4+ as well. Found nothing yet but there is an interfacing boards can link it up fm here. http://www.adaptronic.com.au/forum/index.php?topic=5414.0 I just installed this PLX and hopefully no need to buy another set fm AeM or the LC2..... if it could work for digital output into link Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted March 16, 2018 Report Share Posted March 16, 2018 17 minutes ago, Purpleline said: Im new here but wonder if the PLX SM-AFR Wideband the TX/RX port can be input to g4+ as well. Found nothing yet but there is an interfacing boards can link it up fm here. http://www.adaptronic.com.au/forum/index.php?topic=5414.0 I just installed this PLX and hopefully no need to buy another set fm AeM or the LC2..... if it could work for digital output into link The PLX wideband digital output is RS232 in their iMFD format. 19200 baud rate, 8 data bits , no parity and 1 stop bit. It is output at 10Hz. They will send you a PDF file with details of the format if you ask them. So basically no it won't work over CAN... Hope this helps, Richard. ClintBHP and Vapor 1 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 16, 2018 Report Share Posted March 16, 2018 Yeah, no chance sorry. It will have to be via analog input. Quote Link to comment Share on other sites More sharing options...
Purpleline Posted March 16, 2018 Report Share Posted March 16, 2018 Tks. This is really helpful. I might just go get that AEM x series. Love the PLX oled screen but if it doeant work as good as other option... got to give it up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.