neil brown
Members-
Posts
372 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by neil brown
-
What’s the arming voltage in the settings
-
Will need to check out the aettings around 6 yrs it was sent to NZ for a new main board so hopefully it can work on can Where do I find the settings on this unit for to see if rs232 or can
-
Ask for 4 bar part number mpx4400ap I think
- 6 replies
-
- map sensor
- map
-
(and 1 more)
Tagged with:
-
You can send it to link and they can upgrade it
- 6 replies
-
- map sensor
- map
-
(and 1 more)
Tagged with:
-
Basically yes and remember to turn off an5 as cant have 2 map Sensors active
- 6 replies
-
- map sensor
- map
-
(and 1 more)
Tagged with:
-
Looking at the g4x platform as have this dash on my g4 storm unit Does this work with the g4x as didn’t see it on the list of drop down option on user transmit menu just wondering before u make my mind up of an ecu upgrade from silver g4 storm
-
Will need to look at it
-
Looking in upgrading ecu to either a moonson or storm So can use extra inputs over can is it possible There is 0-5v inputs and switch to ground inputs as well Plus got link display running as well need to check if can run over can as well
-
Adamw thus is what am asking about https://www.ecumaster.com/products/can-switch-board/ If that’s not compatable what else is
-
Does this work with the g4+ platform ta Neil
-
Can you see engine temp on the laptop
-
Translate the first post into English it might help you
-
Mods if not allowed you can remove just wondering of all the folk who have upgraded to the new g4x units what were you using and what are you selling on as looking for a wire in ecu upgrade to replace my wire in g4 storm silver case
-
For what car there is base maps in the g4+ software for a range of cars
-
Since having the 6 speed box fitted on gears 1-4 boost is solid as per target once in gears 5 and 6 it seems to overshoot and pulsey before settiling down on 2 stage closed boost control with stage 2 being active at 30kpa of target same in high and low boost any ideas before I take a trip to the mapper
-
Have you tried engine tuner in Plymouth
-
Where about a in U.K. maybe a dealer could help you
-
What air filter you running and are you running maffless set up panel or cone type just in case of restriction
-
Reading exhaust temps through can bus from arduino
neil brown replied to Angelo/E30M3-M50B28T-E36+'s topic in Link G4
What ecu ? -
Can answer point 3 unlock code is only applied once when it’s new as shipped locked the tuner who did map and put a pin code in to stop people accessing map, if that is the case you won’t be able to modify map but can save map to laptop you can get ecu serial number when you connect to ecu and look under info
-
So what’s connected to the triggers cam and crank sensors
-
Have you read this thread about the 2.5 camshaft sensors to the Do you have avcs heads on the engine
-
Same map as used on the 2.0 ltr and same set up be fire swap have you increased the master fuel setting due to bigger capacity